Solar LED Powered Outdoor Lights with Motion Sensors - LE, 2 Optional Light Modes



Solar LED Powered Outdoor Lights with Motion Sensors – LE, 2 Optional Light Modes

High Brightness
Total of 12 0.6W 5050RGBW LEDs, wide lighting angle of 180° provides you excellent illumination.

Energy Efficient
During the day, the solar panel absorbs sunlight and converts solar power into electricity, saving it in the built-in rechargeable battery.

Adjustable Light Modes
Light sensor mode: The wall lamp will automatically light up with 30% brightness (Bright white light or RGB color light continuous lighting modes can be adjustable) in darkness or at night.
The lighting time is about 10 hours after fully charged for 7-8 hours under the sun.

PIR Motion sensor mode

The wall lamp will automatically turn on in darkness or at night when motion is detected , and it turns to low brightness RGB or dim white light modes after 30s.
Note: Before setting the lighting mode, switch to the “ON” position, and the solar panel need to be shaded if you set the light during the day.

Easy to install
Just simply hang it on anywhere you need or mount it on the wall with included screws. Installation is quick and easy!

Solar panels: 0.6W 4.5V /130mA
Li-ion battery: 3.7V 2000mAh
Luminous flux: 400LM
Material: ABS + PC
Waterproof: IP65
Detection Angle: 180 Degree
Mounting: Screw fixing
Recommended install height: 2-3 meters
Solar Charging Time: 7-8 Hours
Sensing distance: 3- 5metres / 9.8 -16.4ft
Dimension: 6.06 x 4.37 x 2.67inches

What you get
1 x Solar Energy Wall Lamp
2 x Screws
2 x Rubber plug
1 x User Manual

Additional information

Color Temperature (K)